| Kingspan Products ( available to order ) |
Kingspan Insulation offers an extensive range of premium and high
performance insulation products, breathable membranes and
pre-fabricated/ pre-insulated systems for the construction industry.
Following an extensive investment programme, Kingspan Insulation is
continuing to lead the insulation industry by manufacturing the
majority of its insulation products with zero Ozone Depletion Potential
(ODP) and quoting thermal performance data in accordance with the new
harmonised European Standard.
Brewer's can help customers find the most suitable product to meet
particular requirements regarding insulation that conforms to
legislation. This range of insulation products meet the exacting
requirements of the construction industry and are produced to the
highest standards, including BS EN ISO 9002; 1994 and IS EN ISO 9002:
1994. Each product has been designed to fulfil a specific need and has
been manufactured to precise standards and tolerances.
|
Rafter level insulation for tiled or slated pitched warm roof
spaces. Suitable for ventilated roofs for loft conversions or
unventilated roofs for new build or re-roofing. Insulation of pipes and
tanks is unnecessary. Available in 20-200mm thicknesses.
|
 |
|
Partial fill cavity wall insulation. Low emissivity foil facings
are resistant to the passage of water vapour and double the thermal
resistance of the cavity. Clear cavity is maintained. Available in
thicknesses from 17-65mm.
|
|
Breathable membrane for unventilated pitched roofs. Excellent water
vapour permeability - no condensation risk. Completely waterproof - can
be used as a temporary waterproof roof covering. Roll length 50m width
1.5m. |
 | |
Insulation for timber and steel framing systems. Can be used between studs or as an insulating sheathing.
Available in thicknesses from 20mm to 100mm.
|
 |
Insulation for solid concrete and suspended ground floors. No
requirement for a vapour control layer. Can be laid above or below a
concrete floor slab, or between joists in a suspended timber floor.
Available in 20mm to 120mm thicknesses. |
 |
|
|
Insulated dry-lining plasterboard for plaster-dab/adhesive bonding. Plasterboard thickness 12.5mm Insulant thickness; 20-85mm |
 |
|
Structural 6mm plywood composite insulation beneath partially
bonded buily-up felt. Insulation, vapour control layer and decking all
in one board. Available in 20mm to 120mm thicknesses.
Plywood thickness 6mm
Insulant thickness 50-90mm
|
|
Insulated dry-lining plasterboard for mechanical fixing.
Insulation, dry-lining and vapour control in one board. Ideal for
newbuild or refurbishment.
Plasterboard thickness 12.5mm; Insulant thickness 20-80mm
|
 |
|
 |
Price List from 14th June 2010